Did you know you have a practically unlimited source of energy, half a day, fully available to power your project? This PowerFilm Solar Panel is a lightweight and paper thin power solution protected by being sandwiched in between PSA and Kynar polymers that can be easily integrated with your electronics to provide you with solar recharging or direct powering methods! Even while bending and manipulating this solar panel, you will still be able to pull your full allotment of power from it.
This specific panel is capable of 50mA at 4.8V which equates to about 0.2W of power. To incorporate this sturdy solar panel into your project simply melt the PSA and Kynar protecting the two power rails on the opposite sides of the array with your iron, then simply solder on your desired cables, leads, or another connection medium.
Thanks to the Kynar and PSA polyer protecting this solar panel it is suitable for outdoor use. It is important to note, though, that each of these panels is die-cut making the edges susceptible to some moisture ingress. So as long as you make sure that the panel is in some sort of water-proof container it could work just fine years to come!
- Power: 0.24W
- Operating Voltage: 4.8V
- Operating Current: 50mA
- Dimensions: 3.5in x 2.8in (88.9mm x 71.1mm)
- Weight: 4.75g
PowerFilm Solar Panel - 50mA@4.8V w/PSA & Kynar
- יצרן: SparkFun
- קוד מוצר: OR-5674 / PRT-14799
- מלאי ספק: 0 יחידות
- זמינות: במלאי
- לפני מע"מ: ₪44.0